ETEM's work in Ontario covers municipal facilities, school boards, commercial buildings, tenant fit-outs and critical facilities. The principal's prior international roles are listed separately at the end.
19 projects, listed without client names. Each card shows the sector, the discipline delivered and the key systems.
Filter by sector
Showing 19 of 19 projects
04 projects
Electrical engineering for municipal facilities, from 200 A community centres to city-wide multi-facility programs.
50+ municipal facilities
Fire alarm design, emergency and exit lighting upgrades and power distribution across community centres, fire stations, arenas and recreation complexes, with P.Eng.-stamped permit drawings.
Key systems: Fire alarm, Emergency lighting, Power distribution, CEC compliance
Photometric analysis, LED conversion design and dark-sky compliant outdoor lighting for parks, trails and public spaces, with utility coordination and CEC Section 30 compliance.
Key systems: Photometric design, LED conversion, Dark-sky compliance, Utility coordination
Up to 2,000 A service entrance upgrades
Panelboard replacement, branch circuit redesign, HVAC electrical work, fire alarm integration and emergency generator sizing for aging municipal buildings.
Key systems: Service entrance, Panel upgrades, HVAC electrical, Generator sizing
Mechanical-electrical work for HVAC replacements: VFD motor controls, dedicated equipment circuits and emergency power for first-responder facilities.
Key systems: HVAC electrical, VFD controls, Emergency power
04 projects
Electrical design for educational and institutional facilities: lighting upgrades, power distribution, life-safety systems and complete building retrofits.
Interior and exterior lighting redesign across school board facilities, with occupancy and daylight sensors and energy-code compliance.
Key systems: LED conversion, Lighting controls, OBC SB-10
Electrical capacity assessments, service entrance evaluations, distribution panel upgrades and arc flash hazard analysis, with P.Eng.-stamped coordination studies.
Key systems: Capacity assessment, Panel upgrades, Arc flash
Generator sizing with step-loading analysis, automatic transfer switch coordination, emergency lighting design per OBC 3.2.7, fire alarm upgrades and battery-backed egress lighting.
Key systems: Generator sizing, ATS, Emergency lighting
Electrical design for rooftop unit replacements, boiler controls, BAS integration, VFD installations and dedicated mechanical equipment circuits, aligned with the mechanical scope.
Key systems: RTU replacement, BAS integration, VFDs
04 projects
Electrical engineering for commercial buildings: new construction, service upgrades, tenant infrastructure and large power systems.
400–4,000 A service entrance design
Utility metering configurations, transformer sizing, switchgear specification and coordination with Toronto Hydro, Alectra and Hydro One connection processes.
Key systems: Service entrance, Transformer sizing, Utility coordination, Switchgear
Electrical infrastructure for multi-tenant commercial buildings: main distribution, sub-metering, tenant risers, common-area lighting, parking garage systems and EV charging rough-in per CEC Section 86.
Key systems: Power distribution, Sub-metering, EV charging, Parking systems
Standby and emergency generator sizing with step-loading analysis, paralleling switchgear coordination, automatic transfer schemes and CEC Section 46 compliance for commercial and critical facilities.
Key systems: Generator sizing, Paralleling, ATS design, Redundancy
Gas-to-electric conversion engineering: heat pump electrical loads, upgraded service entrance calculations, panel capacity analysis and utility upgrade coordination.
Key systems: Heat pump loads, Service upgrade, Utility coordination
04 projects
Construction-ready electrical designs for retail, restaurant, office and medical tenant fit-outs, from concept to construction.
Dedicated circuits for commercial ovens, exhaust hoods, walk-in coolers and dishwashers, CEC load calculations and exhaust and HVAC interfaces with the mechanical design.
Key systems: Kitchen power, Load calculations, Exhaust interfaces
Power for medical imaging, dental chairs, sterilization equipment and IT and communications infrastructure, with emergency power for critical equipment and IPAC-compliant electrical layouts.
Key systems: Medical power, IT infrastructure, Emergency circuits, Specialized equipment
Standardized electrical design packages for franchise locations: repeatable templates, site-specific adaptations, landlord coordination and permit submissions across multiple jurisdictions.
Key systems: Standardized design, Multi-site, Multi-jurisdiction permits, Franchise template
Open-plan and private office layouts, workstation power and data, boardroom AV infrastructure, server room cooling circuits and base-building electrical coordination with landlords.
Key systems: Office layout, Data and power, AV infrastructure, Base building
03 projects
Electrical infrastructure for critical facilities: redundant power distribution, emergency systems and fault-tolerant architectures.
Tier II/III data centre environments
Redundant A+B power distribution, static transfer switch coordination, PDU specification and fault-tolerant electrical architecture for Tier II/III data centre environments.
Key systems: Redundant power, STS coordination, PDU design, Fault tolerance
Medium-voltage switchgear replacement, protective relay coordination, arc flash hazard analysis per CSA Z462 and updated short-circuit and coordination studies for aging critical infrastructure.
Key systems: MV switchgear, Relay coordination, Arc flash, Short-circuit study
N+1 generator redundancy
Multi-generator paralleling, diesel and natural gas generator sizing with step-loading analysis, day tank and fuel system coordination and automatic transfer schemes for N+1 redundancy.
Key systems: Generator paralleling, Step loading, Fuel systems, Transfer schemes
Electrical and mechanical engineering capability, aligned with architectural and construction interfaces.
Before founding ETEM Engineering, the principal served as Electrical Project Manager on large international infrastructure programs, from design coordination and procurement through installation, testing, commissioning and handover. These are prior roles, not ETEM projects.
Principal-led · Prior role
Electrical Project Manager
Principal-led · Prior role
Electrical Project Manager
Principal-led · Prior role
Electrical Project Manager
Principal-led · Prior role
Project Manager
